2020/06/04 (Day 2)
Room A
09:30 〜 10:50
chair
Yoshihiro TAGUCHI (Keio University)
A211
Photochromic phenomena in nickel oxide film
◯ Hidetaka TAKAKI, Shuhei INOUE, Yukihiko MATSUMURA (Hiroshima Univ.)
A212
Ultra-sensitive thermal conductance measurement of single cellulose nanofibers using a micro fabricated device
◯ Kento Adachi, Kazuho Daicho, Tsuguyuki Saito, Takashi Kodama (Univ. Tokyo)
A213
Thermal conductance measurement of macroscopic fiber materials using four-probe thermal measurement
◯ Akito Sato, Kento Adachi, Takashi Kodama (Univ. Tokyo)
A214
Exploration of heat-transfer controlling COFs using photo-responsive molecules as the building block
◯ Shohei HAYAKAWA, Yoshiaki SHOJI, Fumitaka ISHIWARI, Takanori FUKUSHIMA, Yoichi MURAKAMI (Tokyo Tech)
11:05 〜 12:15
chair
Koji MIYAZAKI (Kyushu Institute of Technology)
A221
【OS基調講演】統合計測法によるソフトマテリアルの熱伝導
◯ Junko MORIKAWA (Tokyo Tech)
A222
Imaging measurement of thermal Hall effect by periodic heating method using lock-in thermography
◯ Kota Tomioka (Univ. Nagoya), Kenichi Uchida, Ryo Iguchi (NIMS), Hosei Nagano (Univ. Nagoya)
A223
Experimental study of bubble deformation and nucleation in nano-space
◯ Sota Hirokawa, Hideaki Teshima, Pablo Solis Fernandez, Hiroki Ago, Yoko Tomo, Qin-yi Li, Tatsuya Ikuta, Koji Takahashi (Kyushu Univ.)
14:00 〜 15:20
chair
Taku OHARA (Tohoku University)
A231
Measurements of thermal boundary resistance in low-dimensional materials using Raman thermometry
◯ Qinyi Li, Koji Takahashi (Kyushu Univ.)
A232
Preparation of partially oxidized graphene by electrochemical exfoliation in water-ionic liquid two phase system for thermal interface material.
◯ Masahide SATO, Masumi KOMATSU, Yukiko HORIKAWA, Rina AKIMOTO (Utsunomiya Univ.)
A233
Characterization of tiny bubbles on hydrophobic substrate
◯ Yusaku MUKAI, Ken YAMAMOTO, Masahiro MOTOSUKE (Tokyo Univ. Sci.)
A234
In-situ electron microscopic study of temperature effect on nanobubble generation
◯ Sarthak Nag, Yuzen Masame, Daichi Yosho, Qin-Yi Li, Tatsuya Ikuta, Koji Takahashi, Masamichi Kohno (Kyushu Univ.)
Room B
09:30 〜 10:50
chair
Takahiro TSUKAHARA (Tokyo University of Science)
B211
Influence of the installation of a rubber sheet on pressure drop and heat transfer characteristics in turbulent channel flow
◯ Tomoya Murakami, Shumpei Hara (Doshisha Univ.)
B212
RANS/LES Hybrid Analyses of Turbulent Flow and Heat Transfer in Pipes with Modified Oblique Wavy Walls
◯ Shu-Qun JIN, Kenichi MORIMOTO (Univ. Tokyo)
B213
Direct numerical simulation of turbulent heat transfer over surface with hemi-spheres
◯ Rika NAGURA, Yusuke KUWATA, Kazuhiko SUGA (Univ. Osaka Prefecture)
B214
Direct numerical simulation on dissimirarity of turbulent heat trasfer over rough walls
◯ Yusuke KUWATA (Osaka Pref. Univ.)
11:05 〜 12:25
chair
Kazuhiko SUGA (Osaka Prefecture University)
B221
High-speed micro PIV investigation of near wall flow in a tumble enhanced internal combustion engine
◯ Eiji YOKOYAMA, Masayasu SHIMURA (Tokyo Tech), Takeshi YOKOMORI (Keio Univ.), Mamoru TANAHASHI (Tokyo Tech)
B222
Direct numerical simulation on the transient response of turbulent heat transfer in plane channel flows under step-like change of flow rate
◯ Tatsuro YAMAZAKI, Yutaka ODA, Ryosuke MATSUMOTO (Kansai Univ.), Masashi KATSUKI (Prof. Emer. Osaka Univ.)
B223
Effects of relaxation time of polyethyleneoxide solutions on turbulence statistics in two-dimensional turbulent flow
◯ Ruri HIDEMA, Kengo FUKUSHIMA, Hiroshi SUZUKI (Kobe Univ.)
B224
Experimental analysis of the correlation characteristics between turbulent heat transfer and ground surface properties in micrometeorological observation
◯ Tomoya HOURA, Daiki MATSUMOTO, Hirofumi HATTORI, Masato TAGAWA (NITech)
14:00 〜 15:00
Room C
09:30 〜 10:50
chair
Yutaka Tabe (Hokkaido University)
C211
Coarse-grained molecular dynamics study of ionomer dispersions in water/alcohol solutions
◯ Takuya MABUCHI, Takashi TOKUMASU (Tohoku Univ.)
C212
Influence of composition and shear rate on PEFC catalyst ink viscosity
◯ Kaname IIDA, Takashi SASABE, Katsunori SAKAI, Suguru UEMURA (Tokyo-tech), Kazuhiko SHINOHARA (FC-Cubic), Shuichiro HIRAI (Tokyo-tech)
C213
Microscopic observation of drying process of PEFC electrode slurry by soft X-ray radiography
◯ Naoyuki MIYAZAWA, Takahiro SUZUKI, Shohji TSUSHIMA (Univ.Osaka)
C214
A new method to evaluate the performance of catalyst layer in PEFC
◯ Taichi ENDO, Hironori NAKAJIMA (Kyushu Univ), Kohei ITO (Kyushu Univ.)
11:05 〜 12:25
C221
【OS基調講演】2030年以降に向けたFCV研究開発におけるチャレンジ（仮題）
◯ Daishu HARA (NEDO)
C222
【OS基調講演】将来の燃料電池開発に向けて ～2030/2040 年へのチャレンジ～ (仮題)
◯ Jun TAKANO (FCCJ)
14:00 〜 15:20
C231
【OS基調講演】2030 年/ 2040 年の目標達成に向けて (仮題)
◯ - - (Toyota Central R&D Labs., Inc.)
C232
【OSパネルディスカッション】
◯ Jun TAKANO (FCCJ), - - (Toyota), - - (Honda), Daishu HARA (NEDO)
Room D
09:30 〜 10:50
chair
Yuzuru NADA (Tokushima University)
D211
An Experimental Study on Properties of Ignition and Meso-scale Flames for Hydrogen added Propane Mixtures in Isotropic and Homogeneous Turbulence
◯ Masaya NAKAHARA, Takamasa KIHARA, Kodai TANIMOTO, Fumiaki ABE (Ehime Univ.), Atsushi ISHIHARA (Saitama Institute of Technology)
D212
Investigation on the pressure fluctuation and flame/vortical structures of the combustion oscillation onset in a turbulent swirling premixed flame
◯ Yuki ATAGI, Masayasu SHIMURA, Mamoru TANAHASHI (Tokyo Tech)
D213
Study on minimum ignition energy transition of furan-blended fuels in intense turbulence
◯ Taichi Mukoyama, Yoshiki Hirano, Takuya Tezuka, Youhi Morii, Hisashi Nakamura, Kaoru Maruta (Tohoku Univ.)
D214
High EGR rate lean turbulent premixed combustion in a pressure elevated vessel with tumble flow
◯ Kohei SAKAI, Takahiro KONAGAMITSU, Yuki MINAMOTO, Masayasu SHIMURA, Mamoru TANAHASHI (Tokyo Tech)
11:05 〜 12:25
chair
Yu SAEKI (Nagoya Institute of Technology)
D221
High-temperature high-efficiency micro-thermoelectric generation directly heated by catalytic combustion
◯ Minhyeok LEE, Junjie PENG, Yuji SUZUKI (Univ. Tokyo)
D222
Study on pyrolysis and oxidation of nitromethane using a micro flow reactor with a controlled temperature profile
◯ Yoshimichi YAMAMOTO, Takuya TEZUKA, Hisashi NAKAMURA (Tohoku Univ.)
D223
Catalytic combustion characteristics of methane-oxygen-nitrous oxide mixture for a bipropellant thruster
◯ Kento Tsujisaki, Koya Mizunuma, Toshiyuki Katsumi, Satoshi Kadowaki (Nagaoka Univ. Tech.)
D224
Quantitative analysis of first tar components volatilized from biomass for use in detailed chemical calculation
◯ Yukihiko OKUMURA (Kagawa Univ.)
14:00 〜 15:20
chair
Takeshi SETA (University of Toyama)
D231
Evaluation of thermodynamic and transport properties of Oxygen-Hydrogen Mixture System by Molecular Dynamics Method
Takumi Ijichi (Univ. Ryukyu), Shin-ichi Tsuda (Kyushu Univ.), Takashi Tokumasu (Tohoku Univ.), ◯ Hiroki Nagashima (Univ. Ryukyu)
D232
The influence of molecular structure on alcohol thermal conductivity - Understanding conduction mechanisms using break down of the Green-Kubo correlations
◯ Likhith Manjunatha, Hiroshi Takamatsu, James J Cannon (Kyushu Univ.)
D233
A reactive molecular dynamics study on thermo-mechanical properties for epoxy crosslinking polymeric materials
◯ Gota KIKUGAWA, Hiroyuki KUNIEDA, Yinbo ZHAO, Yutaka OYA, Tomonaga OKABE (Tohoku Univ.)
D234
Molecular dynamics study on the solidification of water molecules in the vicinity of SiO2 surface
◯ Shota UCHIDA (Osaka Univ./SCREEN Holdings Co., Ltd.), Kunio FUJIWARA, Masahiko SHIBAHARA (Osaka Univ.)
Room E
09:30 〜 10:50
chair
Hosei NAGANO (Nagoya University)
E211
Thickness of liquid film during liquid column oscillation within pulsating heat pipe
◯ Masayoshi MIURA, Yibin ZHAO, Hiroyuki ITO (Kanagawa Univ.)
E212
Measurement of temperature distribution and pressure inside self-excited oscillating heat pipe using Temperature-Sensitive Paint
◯ Keiko ISHII, Rikiya OMATA, Yuya OTAKA, Koji FUMOTO (AGU)
11:05 〜 12:25
chair
Hajime ONISHI (Kanazawa University)
E221
Comparison between closed-end and closed-loop oscillating heat pipe by numerical approach
◯ kohei sone, koji fujita, hiroki nagai (Univ.Tohoku)
E222
Performance evaluation of oscillating heat pipe with different number of turns
◯ Hiroki NAGAI, Hiroki NAGASAWA, Kento WATANABE, Kohei SONE (Tohoku Univ.)
E223
Development of a numerical simulation model of heat transport in pulsating heat pipes
◯ Kizuku KUROSE, Kazushi MIYATA (Kyushu Univ.)
E224
Numerical simulation of the amount of the heat transfer in BACH
◯ Akinori Fukushima, Niro Nagai (Univ. of Fukui)
14:00 〜 15:20
E231
Thermal resistance model by VHDL-AMS description corresponding to flow rate
◯ Noboru Takizawa (Rohm Co., Ltd.)
E232
Investigation Regarding Thermal Resistance of Surface Mount Type Power Semiconductor Package
◯ Koji NISHI, Takahiro MIKUNI (Ashikaga Univ.)
E233
Development of thermal design for desired temperature distribution based on combination with reduction order model and artificial bee colony algorithm
◯ Wataru SATO (Hitachi, Ltd.), Nobuyuki ISOSHIMA, Tatsuya KOBARI, Taro NAKAZAWA, Jin MATSUMURA, Motohiro YAMAZAKI (Hitachi High-Technologies Corporation)
E234
Study of machine learning thermal network model for thermal design of electronic devices
◯ Daiki OTAKI, Hirohumi NONAKA, Noboru YAMADA (Nagaoka University of Technology)
Room F
09:30 〜 10:50
F212
Development of high-throughput and sequential bio-analysis platform utilizing light-induced dielectrophoresis with pico-liter droplets
◯ Yuto Kinoshita, Miki Oura, Yoshihiro Taguchi (Univ. Keio)
F213
High-resolution measurement of flow boiling in a mini-channel using MEMS heat flux sensor
◯ Masanori MORISAKI, Shota MINAMI, Koji MIYAZAKI, Tomohide YABUKI (Kyutech)
F214
Development of double layered thin film resistance sensor for wall surface heat flux measurement
◯ Shohei M Shimoda, Daichi M Katono, Makoto M Kamata, Osamu M Nakabeppu (Meiji Univ.)
11:05 〜 12:25
F221
[Keynote] Application of MEMS to Engine Heat Transfer Research
◯ Osamu Nakabeppu (Meiji Univ.)
F222
MEMS capacitance sensor for detecting sprayed fuel liquid film on an engine intake pipe
◯ Ikue HIRAOKA, Shinichiro WAKURI, Makoto KAMATA, Osamu NAKABEPPU (Meiji Univ.), Tatsuya KUBOYAMA (Univ. Chiba), Satoshi TAKAYAMA (Suzuki)
F223
Heat flux measurements and attempt of estimating flow characteristics in an internal combustion engine using a MEMS sensor
◯ Kazuhito DEJIMA (Univ. Shiga Pref.), Osamu NAKABEPPU (Meiji Univ.)
F224
Verification of MEMS whole heat flux sensor using intermittent air jet
◯ Makoto KAMATA, Yoshiaki TOMOTO, Osamu NAKABEPPU (Meiji University)
14:00 〜 15:20
chair
Junnosuke OKAJIMA (Tohoku University)
F231
Evaluation of effect of spacer and swirl vanes on droplet deposition in bundle flow channel by visualization
◯ Riichiro M OKAWA, Masahiro M FURUYA, Takahiro M ARAI, Tsugumasa M IIYAMA (CRIEPI)
F232
Reduction of continuous regeneration temperature by water vapor in fluidized bed type PM removal device
◯ Tsuyoshi M YAMAMOTO, Kento M YOKOO, Masahiro M KISHIDA (Kyushu Univ.)
F234
Numerical simulation of a bubble behaviour on vertical wall by LBM
◯ Tomohiko Yamaguchi (Nagasaki Univ.), Hajime Takayama (Nagasaki Univ), Satoru Momoki (Nagasaki Univ.)
Room G
09:30 〜 10:50
chair
Shoji MORI (Kyushu University)
G211
Study on propagation model of wetting front during subcooled jet impingement quenching
◯ Liu M Yang, Nakai M Hiroshi, Mitsutake M Yuichi, Tsubaki M Koutaro, Monde M Masanori (Saga University)
G212
Effect of liquid temperature on behavior of droplet impacting onto a hot surface
◯ Shinya Inoue, Tomoro Hori, Yutaku Kita, Sumitomo Hidaka (Kyushu Univ.), Hiroyuki Fukuda (JFE), Yasuyuki Takata (Kyushu Univ.)
G213
Effect of oxide layer of iron on spray cooling
◯ Mikiya Nakamatsu, Ryouta Sakai, Sumitomo Hidaka, Yutaku Kita, Masamichi Kohno, Yasuyuki Takata (Univ.Kyushu)
G214
Effects of Oxide Film on Iron Plate to Cooling Characteristics of Boiling by Water Spray
◯ Niro NAGAI, Yuki YAMAGUCHI, Naoki AKIYAMA (Univ. Fukui)
11:05 〜 12:45
chair
Hiroto SAKASHITA (Hokkaido University)
G221
On characteristics of heat conduction in composite plate
◯ Masanori Monde, Yuichi Mitsutake (Saga Univ.)
G222
Effect of boiling heat transfer on heat treatment distortion while relative flow quenching
◯ Hiromi KAKAZU, Norihide FUJIYAMA (Koyo thermo systems)
G223
Flow visualization around single nucleate boiling bubble by particle tracking
◯ Mao TAKEYAMA (Kyoto University), Tomoaki KUNUGI (Zhejiang University)
G224
Dry-out heat flux in evaporation cooling using a water-containing porous plate.
◯ Kosuke IMANISHI, Kunito OKUYAMA (Yokohama Nat'l Univ.)
G225
Dry-out heat flux in evaporation cooling using a water-containing porous plate.
◯ Kunito OKUYAMA, Kosuke IMANISHI (Yokohama Nat'l Univ.)
14:00 〜 15:20
chair
Wei LIU (Kyushu University)
G231
Observation and measurement of the mechanism of critical heat flux in pool boiling for water
Xiaocheng HU, Zhihao CHEN, ◯ Yoshio UTAKA (Tianjin Univ.)
G232
Improvement of critical heat flux via different-mode-interacting boiling in water pool
Tianxi XIE, Zhihao CHEN, Yoshio UTAKA (Tianjin Univ.), ◯ Toshiki HIROTANI, Hidetoshi OHKUBO (Tamagawa Univ.)
G233
Critical heat flux during pool boiling in bottom and volume heated particulate beds
◯ Hiroto SAKASHITA (HOkkaido Univ.)
Room H
09:30 〜 12:30
chair
Yoshihiro KONDO (Hitachi Academy Co., Ltd.)
H211
大学研究と産業応用～EDAベンチャーの場合～
◯ Hiroshi MURATA (Gem Design Technologies, Inc.)
H212
電子機器の表面実装部品に関する熱設計の基本的な問題点
◯ Koichi HIRASAWA (KOA Corporation)
H213
拡散接合によるマイクロチャネル構造への取り組み
◯ Yutaka SUZUKI (WELCON Inc.)
H214
熱と圧力と材料から見た製品開発
◯ Akira TADA (Hanyuda Co., Ltd.)
H215
工作機械における熱変位問題と熱変位補正システムの紹介
◯ Naohiko SUZUKI (Takamatsu Machinery CO., LTD.)
14:00 〜 15:20
chair
Hiroshi KAWAMURA (Tokyo University of Science)
H231
オーガナイズドセッション「人と熱との関わりの足跡」（その3）
◯ Hiroshi KAWAMURA (Tokyo Univ. Science, Prof. Emer.), Yasuhiro Imai (Imai Kinpaku), Niro Nagai (University of Fukui), Tamotsu Ando (Yuwaku Hot Spring Tourism Association), Hideo Inaba (Okayama University, Prof. Emer.)
H232
金沢金箔の製造における「熱」との関わり
◯ Yasuhiro IMAI (Imai Kinpaku), Niro NAGAI (University of Fukui)
H233
金沢湯涌温泉における氷室とその伝統行事
◯ Tamotsu ANDO (Yuwaku Hot Spring Tourism Association)
H234
低温環境の科学とその産業利活用
◯ Hideo INABA (Okayama University, Prof. Emer.)
Room I
09:30 〜 10:50
chair
Masayuki KANEDA (Osaka Prefecture University)
I211
Findings of new heat storage materials and evaluation of thermo-physical properties for developing a heat exchange system with multistage latent heat storage
◯ Terumi INAGAKI, Takumi IWATA, Kenta ASAI, Yanrong LIE (Ibaraki Univ.)
I212
Investigation of the correlation between phase separation structures and melt convection of Cu-based alloys levitated by electromagnetic levitator with static magnetic field
◯ Eita SHOJI, Rikuto SUZUKI, Shosei ISOGAI, Masaki KUBO, Takao TSUKADA, Hiroyuki FUKUYAMA (Tohoku Univ.)
I213
Implementation of evaporation model into phase-field LBM
Yuta SAWADA, Makoto SUGIMOTO, ◯ Masayuki KANEDA, Kazuhiko SUGA (Osaka Pref. Univ.)
I214
Global linear stability analysis of thermo-solutal Marangoni convection with the opposing forces under microgravity conditions
◯ Radeesha Laknath Agampodi Mendis, Chihao Jin, Atsushi Sekimoto, Yasunori Okano (Univ. Osaka), Hisashi Minakuchi (Univ. Ryukyus)
11:05 〜 12:25
chair
Ruri HIDEMA (Kobe University)
I221
【OS基調講演】乱流中の秩序構造と伝熱解析
◯ Atsushi SEKIMOTO (Osaka Univ.)
I222
Effects of geometric parameters on the bulge structure of visco-elastic fluids in a cavity
◯ Masaki KAWATA, Ruri HIDEMA, Hiroshi SUZUKI (Kobe. Univ)
I223
Study on the formation process of the non-uniform structure in drying to the porous film
◯ Shuji HIRONAKA, Rikutaro UENO, Kousei FUJII, Gen INOUE, Jun FUKAI (Univ. Kyushu)
14:00 〜 15:20
chair
Noboru MOMOSE (National Institute of Technology, Toyama College)
I231
Response of palladium and carbon nanotube composites to hydrogen
◯ Muxuan ZOU, Shuhei INOUE, Yukihiko MATSUMURA (Hiroshima Univ.)
I232
Influence of Nitrogen Molecules on the Emission Characteristics of Atmospheric-Pressure Dielectric-Barrier-Discharge Plasma Flows
◯ Motohiro OSHIMA, Yoshitaka Sakamura (Toyama Pref. Univ.)
I234
Analytical inverse solution of axisymmetric two dimensional transient heat conduction problems
◯ Yuichi MITSUTAKE, Yang LIU, Masanori Monde (Saga Univ.)
Room J
09:30 〜 10:50
chair
Koji MATSUMOTO (Chuo University)
J211
Immersed boundary-lattice Boltzmann simulation of ice slurry flow with heat transfer in a three-dimensional duct
◯ Kosuke SUZUKI, Takuya KUROIWA, Masato YOSHINO (Shinshu Univ.)
J212
Effect of melting of dispersoids in a suspension flowing in a circular tube on the formation of secondary convection
◯ Takashi Morimoto, Motoki Sugiyama, Hiroyuki Kumano (Aoyama Gakuin Univ.)
J213
Heat transfer characteristics of solid or liquid phase nanosuspension type latent heat transport medium
Shin-ichi MORITA (Kitami I.T.), ◯ Tomotaka NISHI (NIT Yonago AC), Yasutaka HAYAMIZU, Takeshi GONDA, Ryoya SHIRAISHI (NIT Yonago), Takanobu YAMADA (Kitami I.T.), Akihiko HORIBE (Okayama Univ.), Naoto HARUKI (Okayama Pref Univ.)
11:05 〜 12:45
chair
Hiroyuki KUMANO (Aoyama Gakuin University)
J221
Mixed convective heat transfer of a phase change material-containing emulsion on a vertical heating surface
◯ Joungmin KIM, Akihiko HORIBE, Yutaka YAMADA, Ryotaro KINARI (Okayama Univ.)
J222
Experimental study of spatio-temporal characteristics of natural convective heat transfer in melting of n-octadecane heated from below
◯ Takahiro OKABE, Takuro MIYANISHI, Taimei MIYAGAWA (Hirosaki Univ.)
J223
Melting characteristics of CNT-dispersed latent heat storage material in rectangular tank with horizontal heating surface
Shin-ichi MORITA (Kitami I.T.), ◯ Yusuke SUGATA, Fumiya IRIE (NIT Yonago AC), Yasutaka HAYAMIZU, Takeshi GONDA, Ryoya SHIRAISHI (NIT Yonago), Takanobu YAMADA (Kitami I.T.), Akihiko HORIBE (Okayama Univ.), Naoto HARUKI (Okayama Pref Univ.)
J224
Freezing of supercooled water by applying ultrasonic wave with an existence of a single bubble
Takayuki M Hachiya, ◯ Seiji M Okawa, Tsutomu M Hozumi (Tokyo Tech)
J225
Investigation on average supercooling degree of mixture in case dropping cationic surfactant-water to non-ionic surfactant-water
◯ Hiroki ABE, Daiki TAKEUCHI, Yuta KUROIWA, Koji MATSUMOTO (Univ. Chuo)
14:00 〜 15:20
chair
Yutaka YAMADA (Okayama University)
J231
Investigation on measurement of adhesion force of ice made from anion surfactant–pure water mixture to Al surface with voltage application
◯ Takumi SATO, Youtaro INABA, Kentaro TSUKAGOSHI, Koji MATSUMOTO (Univ. Chuo)
J232
Characteristics of solid-liquid phase change in the coexistence of two type of TBAB hydrate crystals
◯ Norimichi TAGUCHI, Tadafumi DAITOKU, Takashi TSURUDA (Akita Prefectural Univ)
J233
Growth of twin ice crystals on solid surface from suepercooling aqueous solution
◯ Nao YONEBAYASHI, Yoshikazu TERAOKA, Daichi KUWAHARA (Kanazawa Univ.)
J234
Ultrasonic behavior of metallic alloys during liquid-solid phase change
◯ Hideaki YOSHIOKA (NIT, Ishikawa College), Tomoaki KYODEN (NIT, Toyama College), Tadashi HACHIGA (Komatsu Univ.)